Canon A70/A80 camera
Works nicely. Doesn't appear as an external drive, needs to be accessed through
gphoto2. Tested with (according to
gphoto2 --version) gphoto2 2.1.3, libgphoto2 2.1.3, libgphoto2_port 0.5.1.
lsusb -v output:
Bus 004 Device 002: ID 04a9:3073 Canon Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 Interface
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 32
idVendor 0x04a9 Canon Inc.
idProduct 0x3073
bcdDevice 0.01
iManufacturer 1 Canon Inc.
iProduct 2 Canon Digital Camera
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 6 Imaging
bInterfaceSubClass 1 Still Image Capture
bInterfaceProtocol 1 Picture Transfer Protocol (PIMA 15470)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 96
Language IDs: (length=4)
0409 English(US)
/proc/bus/usb/devices section:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs= 1
P: Vendor=04a9 ProdID=3073 Rev= 0.01
S: Manufacturer=Canon Inc.
S: Product=Canon Digital Camera
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=96ms
MSI DVD+-R/RW writer
Works nicely. Tested on Linux 2.4.21 with DVD-R, DVD-RW, DVD+RW media and
dvd+rwtools. CD-R/RW discs burn flawlessly with
cdrtools 2.01.
Had problems with dvdrecord and other DVD recording utilities; I suppose I could get them working, but dvd+rwtools
already work nicely for me.
hdparm -I output:
ATAPI CD-ROM, with removable media
Model Number: ATAPI DVD DUAL 4XMax
Serial Number:
Firmware Revision: 2.17
Standards:
Likely used CD-ROM ATAPI-1
Configuration:
DRQ response: 3ms.
Packet size: 12 bytes
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 1024.0kB
DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 *udma2
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=383ns IORDY flow control=120ns
7-in-1 USB2.0 Card Reader
Works nicely. Tested on Linux 2.4.21. After connecting to the port, it appears as /dev/sda (or other);
you may like to use
cdrecord -scanbus to make sure where it is. Tested only with
CompactFlash card; MemoryStcik, SmartMedia, MMC and SecureDigital cards are untested (anyone would like to donate?).
The CompactFlash card looks like a SCSI block device; data saved to vfat filesystem on the card were possible to
undelete. More tests scheduled. Cute little toy that fits comfortably into shirt pocket. Laptop-friendly.
Normally, filesystem on the card mounts as /dev/sda1. You can check the card's partition table by
fdisk -l /dev/sda.
lsusb -v output:
Bus 001 Device 028: ID 05e3:0760 Genesys Logic, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 Interface
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0760
bcdDevice 1.28
iManufacturer 0
iProduct 3 USB 2.0 Card Reader
iSerial 4 00001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 512
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 512
bInterval 0
Language IDs: (length=4)
0409 English(US)
/proc/bus/usb/devices section:
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05e3 ProdID=0760 Rev= 1.28
S: Product=USB 2.0 Card Reader
S: SerialNumber=00001
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
Compaq Internet keyboard
Works nicely. I use it for feeding a daemon with commands; the
keybdev.o module is removed
from the kernel and I take input directly from /dev/input/event0 (where the standard keypress/repeat/release
events are sent to, and from /dev/usb/hiddev0 (where the "Internet keys" events are sent to - this doesn't work
for me now, I had a machine crash and not everything is recovered yet and I can't figure out why the damned thing
can't see the hiddev* files; they were created according to /usr/src/linux-2.4.21/Documentation/usb/hiddev.txt and
theoretically everything should be working - it worked already in the past).
lsusb -v output:
Bus 003 Device 002: ID 049f:000e Compaq Computer Corp. Internet Keyboard
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 Interface
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x049f Compaq Computer Corp.
idProduct 0x000e Internet Keyboard
bcdDevice 1.00
iManufacturer 1 Compaq
iProduct 2 Compaq Internet Keyboard
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
Remote Wakeup
MaxPower 50mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 3 Compaq Internet Keyboard
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
cannot get report descriptor
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 12
Language IDs: (length=4)
0409 English(US)
/proc/bus/usb/devices section:
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=049f ProdID=000e Rev= 1.00
S: Manufacturer=Compaq
S: Product=Compaq Internet Keyboard
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 50mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=24ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=00 Driver=(none)
E: Ad=82(I) Atr=03(Int.) MxPS= 6 Ivl=3ms
Leadtek WinFast TV2000XP
Works nicely. Tested with kernel 2.4.18 and 2.4.21 and standard in-kernel drivers.
The btaudio-0.7 driver works, but not entirely - it sometimes locks up during recording, not serving
data anymore (no kernel lockup).
lspci -v -v output:
02:0b.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11)
Subsystem: LeadTek Research Inc.: Unknown device 6606
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR-